Bale Band V 2.2 · Hot

: Place the new spool; this is recommended as a two-person operation .

: Always disengage the hydraulic supply before approaching the machine for maintenance. The emergency shut-off is an electrical switch and should not be solely relied upon for physical safety. Bale Band v 2.2

: The back gates open, and the bundle exits the machine while the cycle resets. Operator's Manual - Bale Band-It : Place the new spool; this is recommended

: The machine must be at Bale Position 0 before starting a new cycle or swapping relay boards. : The back gates open, and the bundle

: Use the red-handled clamp to secure the strap. Do not adjust this clamp while the hydraulic power is off, as it can damage the assembly. Monitoring & Maintenance

: On Bale 21 , the horizontal plunger compresses the stack and ties the bundle with two steel bands.

: The hydraulic return line must be connected directly to the tractor's tank to ensure zero back pressure , which is the most common cause of Strap Guide Arm failures. Threading Steel Strapping Correct threading is vital for consistent bundling.