: Before starting the mold, evaluate the part for manufacturability.
: Automatically detect the outermost profile of the part to help define the parting line.
: Use these surfaces to define where the mold halves will separate. You can create these by extending the silhouette curves to the edges of the workpiece. Mold design Using PTC Creo Parametric (Pro Engi...
: Any changes made to the original part model automatically propagate to the mold components, reducing redesign effort.
: Use Analysis > Geometry > Draft Check to ensure all vertical faces have a draft angle—typically 1° to 2° is standard, while textured surfaces may require 3° to 5° . : Before starting the mold, evaluate the part
: The Mold Design Extension (MMX) provides catalogs for standard mold bases and hardware (ejector pins, slides, and lifters).
: Verify that wall thickness is uniform to prevent cooling issues. Create Manufacturing Assembly : Open a new file and select Manufacturing > Mold Cavity . You can create these by extending the silhouette
: Use the Mold Opening tool to check for interference and ensure the part can be successfully ejected from both halves. Key Advantages of Using Creo for Molds